Box Type Freezer Evaporator MEA-2501 1.09kW

Click to download Catalogue

General features:
The high efficient coils are made from high-quality copper tube o12 mm and special profile aluminium fins. Heat exchangers are supplied clean and tested under a pressure of 30 bars. Box Type Freezer Evaporator MEA-2501 1.09kW has been designed to have a long life and low energy consumption.

The casing:
White power coated aluminium, high corrosion strength, impact resistance, and does not produce polluting debris.

The fan motors:
All with high-quality axial fan motors with high safety standards fitted well to the unit casing with an anti-vibration system.

Defrost heating:
Provided by stainless steel heater elements covered by the aluminium tubes, located in the finned pack and in the drain pan.

Electrical parts and wiring:
Are connected to an earth terminal, carried out in junction box with access holes equipped with water-proof cable grands. All materials are selected carefully for long-term reliability.

INFORMATION
To satisfy the refrigeration requirements in high. medium and low-temperature applications well as different humidity conditions three ranges of unit coolers are available:

1. 4mm fin spacing
2. 6 mm fin spacing
3. 9 mm fin spacing

Distributors and refrigerant circuits were carefully optimized to ensure maximum efficiency of the heat exchangers under various operating condition.

Suction pressure gauge connection was added to allow correct performances of the unit coolers.

All models use external rotor motor high-efficiency low consumption fan motor assemblies. incorporating internal thermal protection All fans have been statically and dynamically balanced. Al fan motor assemblies are wired into the units electrical box.
Insulation class F. protection IP-55

The fan shrouds are designed to obtain homogenous airflow with a long air throw.
Special Polyamide guiding vanes are available (as accessories) improving the long flow range behaviour of the fans. avoiding 'thermal short circuit' specifically in long and narrow cold rooms.

The stainless steel electric heater elements are inserted into aluminium tubes in the finned pack permitting a quick and efficient defrost of the coil The heater elements are connected to the units electrical box. For special conditions of applications heaters for the fan, the shroud can be supplied.

Performance Data

Electric Data